E-Rated Fuses
For Potential& Small Power Trans.JCD, JCW, JCEJCQ, JCI, & JCT
Medium Voltage
Catalog Symbol:JCD, JCW, JCE, JCQ, JCI, AND JCTE-Rated
Current Limiting
Indicating/Non-IndicatingPlated Ferrules
Voltage Ratings:(Max.Design):2750, 5500, 8300,15,500 VOLT
Current Ratings:1/2E THRU 10ENo Agency Listings
2-27-02SB02090
芯天下--http://oneic.com/
•Low amperage, E-Rated medium voltage fuses are generalpurpose current limiting fuses.
•The E rating defines the melting-time-current characteristic ofthe fuse and permits electrical interchangeability of fuseswith the same E Rating.
•For a general purpose fuse to have an E Rating the followingcondition must be met:
The current responsive element shall melt in 300 seconds ata rms current within the range of 200% to 240% of the con-tinuous current rating of the fuse, fuse refill, or link.(Forfuses rated 100E or less)(ANSI C37.46).
•Bussmann low amperage, E-Rated fuses are designed toprovide primary protection for potential, small service, andcontrol transformers.
•These fuses offer a high level of fault current interruption in aself-contained non-venting package which can be mountedindoors or in an enclosure.
Form No.JCD, JCW, JCE, JCQ, JCI, and JCT
Page 1 of 2Data Sheet:6002
E-Rated FusesFor Potential& Small Power Trans.Medium VoltageDimensional Data
ACJCD, JCW, JCEJCQ, JCI, & JCTBSpecificationsBussCatalog No.JCD-1/2EJCD-1EJCD-2EJCD-5EJCW-1/2EJCW-1EJCW-2EJCW-3EJCW-4EJCW-5EJCE-1/2EJCE-1EJCE-2EJCE-3EJCE-4EJCE-5EJCQ-1/2EJCQ-1EJCQ-1-1/2EJCQ-3EJCQ-5EJCQ-10EJCI-1/2EJCI-3EJCI-5EJCI-10EJCT-1/2EJCT-1EJCT-1-1/2EJCT-3EJCT-5EJCT-10EAmperage.50E1.0E2.0E5.0E.5E1E2E3E4E5E.5E1E2E3E4E5E.5E1.0E1.5E3.0E5.0E10.0E.50E3.0E5.0E10.0E.5E1.0E1.5E3.0E5.0E10.0EMaximumDesign Voltage2750V2750V2750V2750V2750V/5500V2750V/5500V2750V/5500V2750V/5500V2750V/5500V2750V/5500V5500V5500V5500V5500V5500V5500V5500V5500V5500V5500V5500V5500V8300V8300V8300V8300V15500V15500V15500V15500V15500V15500VDimensions (Inches)ABC4.54.54.54.57.317.317.317.317.317.315.65.65.65.65.65.69.59.59.59.449.449.449.512.8812.8812.8812.9312.9312.9317.517.517.50.80.80.80.81.561.561.561.561.561.560.810.810.810.810.810.811.61.61.61.61.61.61.61.61.61.61.61.61.61.61.61.60.630.630.630.631.381.381.381.381.381.380.630.630.630.630.630.631.381.381.381.381.381.381.381.381.381.381.381.381.381.381.381.38ConstructionSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleSingleMaximum Interrupting CapacityAmps (Asym.)Amps (Sym.)100,00063,00063,00040,00060,00060,00060,00060,00060,00060,00060,00060,00060,00060,00060,00060,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,000130,00063,00040,00040,00025,00040,00040,00040,00040,00040,00040,00050,00050,00050,00050,00050,00050,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,00080,0002400V;E-Rated Fuse;Indicating2400/4800V;E-Rated Fuse;Non-Indicating5500V;E-Rated Fuse;Non-Indicating4800V;E-Rated Fuse;Indicating7200V;E-Rated Fuse;Indicating14,400V;E-Rated Fuse;IndicatingFuse clip for 1.6”Diameter Fuses - 1A0835Fuse clip for 0.81”Diameter Fuses - 1A1837The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clear-ly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any prod-ucts and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected,it should be tested by the user in all possible applications.
2-27-02SB02090
Form No.JCD, JCW, JCE,
JCQ, JCI, and JCT
Page 2 of 2Data Sheet:6002
芯天下--http://oneic.com/
